E-Collar Technologies 400 Series, Руководство пользователя

Страница: 18 / 34

400/402 Owner’s Manual
17
REPLACE/ADD A COLLAR
Occassionally, it is necessary to pair/sync a transmitter to a collar
receiver, the following procedure will accomplish this:
1. Turn on the Transmitter
2. Turn intensity dial to “0”
3. Make sure the collar eceiver is turned off.
4. Put the Red Dot on Transmitter against the Red Dot on collar receiver for
more than 5 seconds until the green light changes from solid to
rapidly flashing green light.
5. While the indicator light on collar receiver is rapidly blinking press the
Black S Button first followed by the Red S Button simultaneously for more
than 2 seconds or until you hear the confirmation sound from the collar
receiver.
HOW TO CHANGE THE TRANSMITTER TO A 2 DOG TRANSMITTER
The button functions will change. The changes are described on pages 18
through 22. You can change the transmitter back to the 400 one dog
system at any time.
1. Turn on the Transmitter.
2. Press the Red "S" followed by the Black "S" followed by the "T" Button
simultaneously for more than 2 seconds until you hear the confirmation beeps.
3. Repeat step 2 to return back to a 1 dog system.
ADD/REPLACE COLLAR FOR SECOND DOG
1. Turn on the Transmitter
2. Turn intensity dial to “0”
3. Make sure Receiver is turned off.
4. Place the Red Dot on the Transmitter against the Red Dot on Collar
Receiver for more than 5 seconds until the solid green light begins to
flash rapidly.
5. While the indicator light on the receiver is blinking rapidly, press the Red
"S" Button and then the Black "S" Button simultaneously for more than 2
seconds until you hear the confirmation sound from Transmitter.