E-Clear MK7/CF1-75, Руководство пользователя

Страница: 22 / 88

20
8.1.1. Physical Installation
Step 1
The e-Clear must only operate when the pool
pump is running.
Step 2
The e-Clear system must be installed as last
piece of equipment before water returns to the
pool. (See diagrams above)
Step 3
The chamber should be fitted in a vertical
orientation, not sideways, preferably as a "I"
Step 4
Water must flow through the ultraviolet
chamber first (if installed) then the oxygen
chamber and finally the ionization chamber.
Step 5
The white electrode cable attaches to the
black oxygen plates. The black electrode cable
attaches to the pink ionization plates. Undo
cable ties and plug cable into ebox.
Step 6
Large assembly type units must be installed
according to technical installation drawings
guidelines.
Step 7
The entire pool volume should flow through
the pool filters every 4 hours, according to
international DIN standard
Step 8
e-Clear's natural oxygen process requires good
water movement in your pool with no "dead"
spots and deep glass media filter beds
We HIGHLY recommend only using recycled
glass filter media or consol glass media, not
Silica course glass media.
Step 9
All pools, whether run on chlorine, salt or e-
Clear, may lose water quality from time to
time under extreme load, adverse weather or
other circumstances. We recommend using a
hydrogen peroxide shock, non-metal based
algaecide or Polysheen clarifier.
Warning
Do not add Chlorine to your pool while the e-
Clear system is powered. This will damage the
e-Clear system. Do not add metal based
algaecide or metal remover. Whenever adding
any chemicals to your water make sure the e-
Clear is powered off.