STEP 2: (a) (x2) Secure the leg assembly to the seat using 2 - 3” stainless steel allen head bolts through the predrilled holes in
the leg assembly and seat (making sure that the wider end of the arm rest is towards the front of the seat). (b) Place a
stainless steel washer and lock nut on the back of the bolt and tighten with a 7/16” wrench and a 5/32” allen wrench until the
head of the bolt sits tight to the leg. (c) (x2) Fasten the back assembly to the seat by using 2 – 2” stainless steel flat head
screws. (d)(e) (x2) Line a 3 ½ “ stainless steel allen head lag up with the predrilled hole in the middle back support and fasten
the armrest to the center back support with a 5/32” allen wrench .
(a)
(b)
(c)
(d)
(e)
