Reset Device (find out how many cycles are left on a 'e-
BLEACH - 10x4')
To see how many sessions are left on a 'e-BLAECH - 10x4' just
press the reset button short and see the red LED.
After pressing the reset button the LED will first doubleflash. Then it
will flash as many times as you can renew the device. Like this you
can count the flashes and check how many cycles are left on the
device. On a new device this will be nine times.
When the device was renewed nine times you will only see the
doubleflash and the renewal will not be possible anymore.
