E-bikes A1, Руководство пользователя

Страница: 7 / 14

7 www.e-bikes.se
Alignment of handle bars
•The handle bar assembly may need some small adjustment for the alignment of the headset to the front
wheel.
•Undo the head stem folding hinge and drop handle bar down.
•Use a 6 mm Hex key to loosen the handle bar stem.
•Align handle bars so it is perpendicular to the front wheel (As shown below) .
Hand bar
Carefully lower the handlebars back down and tighten the 6mm hex key firmly. Check and recheck for
firmness.
Install Pedals and Tighten Crank.
Use a small amount of axel grease on shaft before installing. Ensure you clearly identify Right and Left pedals via
the R or L stamped on the end of the pedal shaft. Screw pedal in clockwise. Tighten with pedal spanner or 15mm
spanner. Remember bicycle pedals tighten in a clock wise direction.
Remove Plastic chrome cap on crank and tighten with 14mm socket. Both Left and right hand sides.
Folder able models need folds up the pedal before put on crank.
Folding device
Handelbar