31
o
6 = current (in *10Amp), e.g. 153 = 15.3A
o
7 = Voltage
o
8 = Voltage (in *10V) with 40V offset, e.g. 145 = 54.5V, 72= 47.2V
9 = Software Version (This setup is for Software 10)
o
10 = Percent of Battery capacity, in 5% steps, speed limit disabled
Make sure the value are correct, or the distance to is maybe wrong calculated. Also check that
the correct Software Version is installed (Version 18 – 22)
Page 32 of 44
4. Consumer
Information
4.1. Maintenance
•
Service
The first inspection must be done after around 200km or max. 8 weeks
The normal inspection must be done regulary very 6 months or 3000km, latest after one
year.
•
Check all Screw Connections Regularly:
Please check all screw connections regularly, especially the ones for the steering, wheel
axles and suspension.
•
Adjustment of Brakes:
The mechanical front wheel brake can be adjusted at any time with its adjusting screws,
one at the brake lever and one directly at the brake caliper. The hydraulic rear brake
adjusts itself.
•
Tire and Tire Pressure:
Maintain tire air pressure as stated on the tire sidewall. If you exceed the tire air pressure
stated on the tire sidewall, you increase the risk of loss of control, collisions, and falls. Lower
pressure reduces range and can cause tire and wheel damage! Once the tired tread is
worn out, the tire needs to be replaced.
•
Replacing Wear-and-Tear Parts:
Please note that only original parts, supplied by Manufacturer or its authorized dealers are
permitted. Have service work completed only by trained personnel or by your authorized
Bikeboard dealer. Find your closest dealer on
www.e-bikeboard.com
.
Tire/rim size
Recommended tire pressure
Maximal tire pressure
front
12” rim
2.5 bar / 36 psi
2.8 bar / 40 psi
rear
4“/6" rim
2.5 bar / 36 psi
3.5 bar / 50 psi
4.2. Repairs
•
Any repairs must be performed by your specialized Bikeboard dealer. You can find your
closest dealer on our homepage:
www.e-bikeboard.com
. Only original parts, supplied by
Bikeboard are permitted.
•
Do not modify the E-Bikeboard from the manufacturer's original design and configuration.
Any repairs and/or modifications should be performed by a licensed E-Bikeboard dealer or
trained technician.
