E-Bike CITY BIKE, Оригинальное руководство по эксплуатации

Страница: 46 / 112

Install the components of the bike
44
Install the handlebars
To install the handlebars on a stem, proceed as follows:

Unscrew the four screws of the stem plate.

Remove the stem plate.

Insert the handlebars.

Make sure that no cables (brake cables or gearshift) are jammed or
twisted.

Insert the stem plate.

Secure it with the four screws.

Make sure that the handlebars are centred.

Tighten the four screws crosswise.
The handlebars are installed.
Install the saddle
Proceed as follows to install the saddle including the seat post:
To open the saddle clamp, you need either a wrench or Allen key. If
there is a quick-release fastener, it can be opened by hand.

Open the saddle clamp.

Insert the seat post into the seat tube.
The front end of the saddle must point in the direction of travel.

Close the saddle clamp.
The saddle is installed.

Adjust the saddle as described on page 50.