e-bike vision 10020 Скачать руководство пользователя страница 9

 

 

Date 2023-04-14 

Akku Vision - Manual E-Bike Vision Battery compatible to Bosch* Classic 

S. 

9

 / 

9

 

Index  08 

*Bosch is a trademark of the Robert Bosch GmbH 

 

 

Capacity is indicated during use as folows: 
 

LED 1 flashing:  

 

 

0 – 5 % charged capacity 

LED 1 lighting:   

 

 

6 – 20 % charged capacity 

LED 1 and 2 lighting:   

 

21 – 40 % charged capacity 

LED 1,2 and 3 lighting:   

 

41 – 60 % charged capacity 

LED 1,2,3 and 4 lighting: 

 

61 – 80 % charged capacity 

LED 1,2,3,4 and 5 lighting: 

 

81 – 100 % charged capacity 

 

Do not remove your battery off the eBike, as long as the drive system is on. Turn it off before! 
 

Your new E-Bike Vision Battery  owns the latest and most safely battery management system technology and 
protects itself from incorrect operation. Before the cells would be completely discharged, the battery switches off 
the motor. However, there will remain enough power within the battery, to drive safe home with activated lights, if 
you are powering the lights via the drive battery.

 

 

Maintenance 

The life span of your E-Bike Vision Battery depends mainly of your carefully usage. 
Never use the complete capacity, but use it regular and store it at 17° C. That way, your battery will thank you will 
longer life span. 
With increasing aging your battery will loose capacity, anyway. 
Do not try to refresh or exchange the cells on your own! 
Get in contact with our service department. They can also rate and exchange single components after the warranty 
time. 
An essential shorte usage time after fully charged the battery indicates that the battery is dissipated, however. 
Replace it! 
 

Troubleshooting 

If your drive system can not be activated, please check the contacts of the discharge plug to make sure that they are 
clean, straight and undamaged and that there is a safe contact between battery and connector box. 

 

If the drive system can still not be activated, please try to charge your battery. 
If charging does not start, please check the polarity of the charge plug. 
Please test the battery by pushing the capacity indicator button. 
Is the power cord of the charger connected properly and performs the wallet socket? 
 
If the battery is damaged, defective or exits any liquids or smell? Please do not use your E-Bike Vision Battery further 
and contact your dealer or our service center. 

 

Recycling 

Do not dispose lithium batteries in the household waste! Return defective or used batteries to the 
battery dealers or to the municipal waste collection centers. Turn back the battery in discharged state. 
Also prevent short-circuits by covering the terminals. With the proper disposal of your battery, you 
make an important contribution to protect our environment. 

 

 

Содержание 10020










Отзывы: