Operating Instructions|
GB
Press
the
“STOP” button once
to
stop playback
of the pro-
grammed compilation. The
programmed compilation of titles
continues to be stored
.
Press the “STOP” button
a
second time
to
terminate the
program function
and
erase the programmed compilation
.
“PRG”
indicated on the
display
is
faded out
.
. Switching off the set
To
switch off the set
adjust
“OFF”
with the
function selector
on the left-hand side of the set.
. Connecting headphones
To
connect headphones plug the 3.5 mm jack plug
of the
headphones into the
headphones socket
on the
right-hand
side of the set
.
. Cleaning
Only use a slightly moist cloth to clean the case surface of the
set. Ensure when cleaning that no moisture enters the set
.
The
inside of the CD compartment must only be cleaned
with a clean, dry brush
(e.g. lens brush available from pho-
tographic dealers).
NEVER moist clean the inside of the CD
compartment!
Warning!
Moisture penetrating the set can give rise to
the danger of an electric shock!
Only clean the laser scanning lens
inside the CD compart-
ment (if necessary) with a
clean
,
dry brush
.
NEVER touch the
laser scanning lens with bare hands!
Please note!
Only clean the laser scanning lens
inside the CD compart-
ment (if necessary) with a
clean
,
dry brush
.
NEVER touch
the laser scanning lens with bare hands!
. Functional faults
Proceed in the following manner in the event of
functional
faults of the set
…
• First
disconnect the plug from the mains socket
or
remove
the batteries from the battery compartment
.
•
Check
that there is
at least 10 cm space above, behind and
on either side of the set in relation to walls or objects.
If this is not the case
, then
switch off the set
and allow it
to
cool down for at least one hour! Relocate the set in
Manual_KH2241_EN
16.09.2003, 14:56 Uhr
15
