Assembling your machine
Use both hands to lift your machine out of the box, by its base.
Do not lift out by the loop amplifier.
Assemble your machine with the filters that are supplied.
Dyson Purifier Cool
Supplied with a HEPA+Carbon filter.
Push your HEPA+Carbon filter into the outer cover and position onto
the base. Push firmly until both outer covers click securely into place.
Clik
Dyson Purifier Cool Formaldehyde
Your machine comes with a permanent catalytic filter and a HEPA+Carbon
filter.
Push the catalytic filter into position on the machine.
Push the HEPA+Carbon filter into the outer cover and position on the base.
Push firmly until both outer covers click into place.
Clik
Getting started
Place the remote control on top
of the machine with the buttons
facing down.
Plug in and switch on.
Standby on/off
Remote control
Standby on/off
Airflow speed
Oscillation on/off
Information menu
Auto mode
Airflow direction
Night mode
The air purifier fan with
the filter covers open
showing a HEPA plus
carbon filter located in the
filter covers and a catalytic
filter. Arrows demonstrate
that the catalytic filter is
fitted directly to the base
of the machine and the
filter covers will need to be
assembled onto the base
of the machine.
An image of the air purifier fan with
the remote placed on the top of the
loop amplifier and the location of the
standby on/off button on the top of
the base of the machine.
The layout of the remote control with the power button on the top left, the
airflow speed toggle button in the middle left and the oscillation button on
the bottom left. On the top right-hand side is the Information menu button,
then going downwards is the Auto mode button, Airflow direction and then
the Night mode button at the bottom.
The air purifier fan with
the filter covers open
showing a HEPA plus
carbon filter located in
the filter covers. Arrows
demonstrate that the filter
covers will need to be
assembled onto the base
of the machine.
