clik
clik
clik
clik
clik
clik
Make sure your brush bars are
completely dry before refitting.
Each brush bar is engineered to
correspond to a specific position on
the end cap. It is important that both
brush bars are fitted in the correct
position. Slide the assembled brush
bars back into the cleaner head.
Push the end cap until it clips securely
back into the closed position.
The cleaner head housing is not
washable and should only be wiped
over with a damp lint-free cloth.
Hold your brush bars under cold tap
water and gently rub to remove any
lint or dirt. Keep washing until the
water runs clear.
Stand the brush bars upright and
leave for at least 24 hours to dry.
Don’t put any part of your machine
in a dishwasher or use detergents,
polishes or air fresheners.
Press the cleaner head release button
to remove it from the wand.
Push the button on top of the cleaner
head to release the brush bars. Slide
them out of the cleaner head.
Pull the brush bars off the end cap
and put the end cap to one side, don’t
wash it.
1
2
3
To maintain optimum performance,
check and wash your brush bars regularly.
Washing your brush bars
