Gimbal balance
It is essential to balance the Summer for the best performance. Especially for some extreme sports or
accelerations, accurate balance can improve the shoots quality, as well as the battery life. The balanc-
er will help a lot to adjust the pitch, roll, pan axis while power on. Balance finished and without power,
all 3 axes almost keep in horizontal level, will not deflect one side seriously.
1) Camera locking screw hole is the chute for adjusting camera gravity (see pic 1 of page 7). Adjust
properly ( slightly adjust ) to keep the camera in horizontal level.
2) After balanced, the camera can stay in any tilt angle you rotate.
1) Rotate the camera to one position( note that the lens can reach), remove your hand and adjust the
vertical balance screw, slightly adjust and keep scales of both sides are same. Otherwise, the
camera will deflect to one side, and the tit motor cannot rotate. Adjust again in order that the camera
lens can stay in the position when remove your hands.
2) After adjusted, you should turn the camera by hand to confirm the pitch motor work properly. If
vertical balance need to adjust significantly, the pitch axis balance may be adjusted again. After
that, the camera will stay in that position no matter where you rotated.
If it cannot balance well with vertical adjustment screw, please try to adjust the 4 screws of fixed plate
to balance it.( see pic 2 of page 7).
Step 1: Pitch axis balance
Step 2: Vertical balance for pitch axis
Advance pitch adjustment:
Vertical adjustment screw
Vertical adjustment screw
Banlancer
Scale
Scale
Remove the lens cap and insert memory card after mounting the camera and lens. Make sure
the camera is ready to shoot before balancing the gimbal. Please be sured the power is off
while balance the gimbal.
7
Содержание Summer
Страница 1: ...Summer User Manual V1 0 2015 02...