PRODUCT STRUCTURE
USING THE APPLIANCE
1. Put the product on a stabile, flat surface.
2. Take off and turn up the water tank, rotate the lid to open, than pour pure water
into the tank. It is recommended to use destiled water to avoid limescale build-
up. Please pay attention that the water temperature should not exceed
40°C.
The water level should cover at least two-thirds of the water tank.
3. Put back and tighten the lid, place the tank onto the base, than switch on the
device.
4. When power indicator illuminate to BLUE, it means there is enough water in the
tank and it is ready to work; when it become RED, it means you should add
more water for the device to work.
5. According to dryness, rotate the knob to get the right amount of fog for your
room.
6. When the tank is short of water, the indicator will turn to RED, and the internal
safety device to cut off the fog generation process. If you want the device work
again, you need to turn off the power and add enough water into the tank.
7. How to add water:
Please add clean and pure water into the tank. The temperature should be
under 40 C°. After the tank is filled with water, tighten the lid and wipe the water
droplets on the surface with a cloth.
