
SVC-800
8
store the appliance in a dusty room; keep it away from animal hair and other fibres that could block the flow
of air.
•
Ensure to clean the dust collector after every use. After cleaning, always dry the accessories before
reattaching them to the unit. Make sure to dry all moisture from the dust collector to prevent mould. When
cleaning, check the condition of the filter. If it is worn, replace it.
•
If the inlet becomes blocked or suction power is suddenly reduced, switch off the appliance immediately and
unplug it from the mains. Investigate the problem when the appliance is safely unplugged.
•
When using the vacuum cleaner, always maintain a safety distance of at least 1m between the cleaner and
any container filled with water.
Please keep this instruction manual. If you give the appliance to anyone else, you must give them
this instruction manual, too!
MAIN COMPONENTS
1. Handle
2. Handle-connector
3. Suction head connector
4. Narrow suction head
5. Floor brush
6. Dust collector
7. Release button of dust collector
8. Fabric filter screen
9. Foam filter
10. Cable holder
11. On/Off button
POWER SUPPLY
The device must only be plugged into an electric mains supply of 220 to 240 VAC, 50/60 Hz.
Always check that the site voltage is identical to that indicated on the device nameplate.
PREPARING CLEANER FOR ASSEMBLY
1. Unpack the appliance and remove all the packing materials.
User'sManual SVC-800.indd 8
User'sManual SVC-800.indd 8
2013.08.01. 9:27:58
2013.08.01. 9:27:58