dyras PB-460G, Инструкция по эксплуатации

Страница: 8 / 57

USING of aPPLIaNCE
Before use
• Unpack the appliance and remove all the packing materials.
• Inspect the appliance and the accessories carefully to verify their soundness and undamaged condition. Only
perfectly sound and damage-free appliances may be connected to the electrical mains.
• After removing the packaging (or after a lengthy period of storage), carefully clean all the parts that come
into direct contact with food; in particular, the mixing jug, mixing blade, grinding jug and grinding housing.
Detailed instructions are given in the 'Maintenance and cleaning' section.
assembling the blender
1. Fasten the blender jar to the motor unit, making sure that it fits properly. Mount the
blender jar so that, facing the device, the jar handle is positioned to the right-hand
side of the device. Check to make sure the jar is securely fastened to the motor unit.
The blender jar can only be fastened normally to the motor unit in one specific
position. Thanks to the safety switch the device can only be activated if the jar is
positioned properly. If, in the course of fastening the blender jar to the motor unit, the
blender jar gets stuck or does not fasten to the motor unit precisely, do not force it,
instead rotate the plastic clutch on the bottom of the jar just a bit, and afterwards try
to fasten the jar to the motor unit again.
2. Place the lid on the bowl so that the collars on the lid fit in the grooves of the bowl,
and then turn the lid slightly clockwise, so that the arrow on the lid faces towards the
nose of the bowl. Then insert the graduated jar into the filling hole located in the
middle of the bowl lid.
Using the blender
1. Place the appliance on a flat, stable work surface. Ensure the base unit will remain ventilated during use;
remove any material (e.g. a soft tablecloth, paper etc) that could cause problems.
2. Remove the mixing jug from the base unit. Remove the lid and fill the jug with your chosen ingredients. Avoid
filling the jug to the 'max' marking if you are using thin liquids. To prepare larger quantities, simply make a
number of smaller batches. (Remember to allow the machine to rest after a maximum 60 seconds use).
Always place liquids in the measuring jug before adding any solid ingredients. Solid foods (e.g. vegetables,
fruit or meat) should be cut into small pieces before placing them in the jug. Do not fill the mixing jug beyond
the halfway mark (0.75l) when using coarsely-chopped food. After adding your ingredients, fit the lid on the
jug and insert the feed opening cap. (Make sure the lid fits tightly). Wipe any moisture or food from the
outside of the jug.
When preparing the ingredients to be blended, the 30 x 60 millilitre blending funnel can be used to measure
the ingredients.
8
PB-460G