5
Route the IM harness down to the left
side of the scooter following the fair-
ing frame support
6
Use the supplied plastic ties to secure
the IM harness to the fairing frame
support (Fig. D)
7
Locate the clear 2 pin crank pickup
coil connector. It is located near the
big white 3 pin connector (Fig. D)
8
Plug the Ignition Module in line with
the stock crank pick-up coil connec-
tors (Fig. D)
9
Continue to route the Ignition Module
harness down theleft side of the
scooter and go towards the igniton
coil.
10
Secure the Ignition Module harness to
the stock wiring harness using the
supplied zip ties (Fig. E)
Fig. D
Fig. E
6-66
www.powercommander.com
2008 Yamaha T-Max 500 - Ignition module -
3
Crank
connectors
Zip ties
Fig. F
11
Unplug the ORANGE wire from the
ignition coil and plug the ORANGE
colored wires from the Ignition
Module in-line of the stock wiring
harness and coil.
12
Unplug the RED/BLK wire from the
ignition coil and plug the RED wires
from the Ignition Module in-line of
the stock wiring harness and coil.
13
Plug the white 10 pin connector from
the ignition module into the expansion
port of the PCIII.
14
Reinstall all bodywork
Zip ties
IM harness
IM harness
Coil
