9
Attach the ground wire from the PCIII
to the negative side of the battery
(Fig. D).
Fig. D
2008 Suzuki Hayabusa - PCIII USB -
3
i339-411
www.powercommander.com
Ground wire
PCIII harness
10
Install the PCIII in the tail section
using the supplied velcro. Make sure
to clean both surfaces with the alcohol
swab before attaching.
11
Bolt fuel tank back into place.
12
Locate the stock O2 sensor connec-
tion. This connection is behind the
right hand side fairing. The fairing
needs to be pulled away from the
frame to gain access but does not
need to be totally removed.
13
Plug the Dynojet O2 eliminator into
the stock wiring harness. The stock
O2 sensor will not be connected to
anything.
14
Reinstall fairing.
Fig. E
