M0726(2):LMFI Series 5000 Lab Melt Flow Indexer
6
English 02/2014
SAFETY INSTRUCTIONS
All safety instructions must be understood and observed. Non-observance of safety instructions
may cause damage to life and health of persons, environmental damage and/or extensive
damage to property.
Observing the safety instructions included in the operating instructions will help to avoid dangers,
to operate the product profitably and to secure the full use of the product.
Warnings, Danger and Informational Symbols
General safety instructions concerning the activities are given at the beginning of the relevant
chapter. Special safety instructions concerning the individual steps of action will be given together
with the corresponding step of action.
The following pictographs are used in the present operating instructions
Danger
This symbol indicates that death,
serious
bodily
injuries or
considerable
damage to property
will
occur if the corresponding safety measures are not
observed!
Warning
This symbol indicates that death,
serious
bodily
injuries or
considerable
damage to property
may
occur if the corresponding safety measures are not
observed!
Caution
This symbol indicates that
minor
bodily injuries or
minor
damage to property
may
occur if the
corresponding safety measures are not observed!
This symbol indicates that special danger to the life
and health of persons is present due to electric
potential!
This symbol indicates that special danger to the life
and health of persons is present due to hot surfaces!
This symbol indicates that sufficient personal
protective equipment must be worn when working
with the LMFI. The type of personal protective
equipment will be defined in detail!
This symbol signalises user hints and other special
information, which may be useful. This symbol does
not signalise safety instructions!
Please also note that a safety symbol may never substitute the text of a safety instruction -
therefore, the text of a safety instruction must always be read completely!