6
Troubleshooting
9
Click
Next
. The following screen opens.
The purpose of this screen is to configure the TCP/IP setting of
each wireless connection. You must define if the current profile’s IP
setting is assigned by a DHCP server or assigned by a fixed IP that
is determinate by the Network Administrator.
10
Set the values of the following fields:
•
DHCP Status
—Select
Enable
if the TCP/IP information is
assigned by a DHCP Server. Select
Disable
if you would like to
specify the IP address manually.
•
IP Address
—Enter the IP address for the network card.
•
Subnet Mask
—Enter the subnet mask for the network card. The
default is 255.255.255.0
•
Default Gateway
—Enter your network’s default gateway’s IP
address.
•
DNS Server
—Enter the domain name system server’s address.
11
Click
Complete
. You are finished.
Profile Setting tab
The
Profile Setting
tab lets you create profiles for different network
environments.
On this tab, you can click the following buttons:
•
Add
to create new profile.
•
Edit
to edit the currently highlighted profile.
•
Delete
to delete the currently highlighted profile.
•
Connect
to connect to a network using the currently highlighted
profile.
About tab
The
About
tab shows the product version including details of the driver,
application, and firmware versions. You must use this version number
when reporting problems to Dynex.
Troubleshooting
Windows 98
To make sure that the WLAN 802.11g device is installed properly:
1
Click
Start
,
Settings
,
Control Panel
, then
Network
. Click the
Configuration
tab. If you find the WLAN 802.11g card listed, it
means the card is installed properly. If you see a yellow question
mark, it means there is a resource conflict.
-OR-
Right-click on the
My Computer
desktop icon, then select
Properties
. Click
Device Manager
, then click on
Network
Adapter
. If you find the WLAN 802.11g card listed, it means the
card is installed properly. If you see a yellow question mark, it
means there is a resource conflict.
2
Click on the card and then on the card service. You will see the
status of the card. If there is a yellow sign either on the card, check
the following:
• Check to see if your computer has a free IRQ. Free an IRQ by
assigning the same IRQ to some devices. For example COM 1
and COM 2 can be assigned the same IRQ values.
• Make sure that you have inserted the correct card and have
installed the correct driver.
Windows 2000
To make sure that the WLAN 802.11g device is installed properly:
1
Use Windows 2000 Diagnostics to see if there is any conflict in the
resource allocation of the I/O Address or IRQ allocations. If you find
that the IRQ or I/O Addresses are already assigned to other devices,
you must change that value. The I/O Address must be 40h bytes
long.
2
Go to the Control Panel. Double-click on the card and view the
WLAN card. Double-clicking on the card shows you the card
information, driver name, and the driver file. If you do not find the
names, there are some problems and the driver is not installed
correctly. Reinstall the driver.
3
Check the PnP BIOS setup menu, then click
No
.
DX-WGNBC_WGDTC_combo.fm Page 6 Wednesday, June 21, 2006 11:53 PM