Using your shredder
1
Slide the power switch to
On/Auto
.
2
Insert paper or one credit card into the document feed opening. You can
insert 3 vertically folded sheets of letter-sized paper at a time.
Note:
Do not put paper clips, adhesive paper, or tape through the shredder.
3
If the shredder jams, slide the switch to
Reverse
to reverse the paper,
clear the paper jam, then slide the switch to
On/Auto
.
4
When the wastebasket is 2/3 full, slide the switch to
OFF
, unplug it from
the power outlet, then remove and empty the wastebasket. Replace the
wastebasket.
Troubleshooting
Specifications
IMPORTANT SAFETY INFORMATION
• Avoid touching the document feed opening with your hands.
• Keep pets and children away from the shredder.
• Keep loose clothing, jewelry, hair, and other personal items away from the
shredder.
• Unplug the shredder before cleaning or emptying the wastebasket.
• Do not place the shredder near a heat source or store in a humid
environment for long periods of time.
• Unplug the shredder if it will not be used for a long period of time.
• Do not use aerosol products near the shredder.
• Make sure that the power outlet is near the shredder and easily
accessible.
One-year limited warranty
Visit www.dynexproducts.com for details.
Contact Dynex:
For customer service, call 1-800-305-2204 (U.S. and Canada) or
01-800-926-3020 (Mexico)
www.dynexproducts.com
DYNEX is a trademark of Best Buy and its affiliated companies.
Registered in some countries.
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richfield, MN 55423 U.S.A.
©2014 Best Buy. All rights reserved.
Made in China
V1 ENGLISH 14-0922
Cutting style
Entry width
Shred capacity
Dimension
Cross cut
4.7 in. (120 mm)
3 vertically folded sheets
(75g/letter size paper)
1 credit card
7.1 × 7.1 × 8.6 in.
(180 × 180 × 219 mm)
Shred size
Duty cycle
Input
Net weight
Basket capacity
.19 × 1.34 in. (5 × 34 mm)
2 mins ON / 30 mins OFF
AC120V, 60Hz, 1.1A
3.9 lbs. (1.8 kg)
0.8 gal (3 L)
Problem
Shredder does not
work after paper is
inserted.
Shredder does not
stop after shredding
has finished.
Shredder makes a
high noise.
Shredder does not
shred paper
Solution
• Make sure that the power cord is plugged into a working power outlet.
• The motor may have overheated. Wait for about 30 minutes, then try again.
• The paper feed may be jammed. Slide the switch to reverse to remove any
jammed paper, then try again.
• The shredder head may not be placed correctly on the wastebasket. Make sure
that the safety interlock labels are aligned.
• The sensor may be jammed by paper. Unplug your shredder, then clean the paper
entry.
• Make sure that the shredder is on a flat and stable surface.
• You may have inserted too much paper. Make sure that you do not insert more
than 3 vertically folded sheets of letter-sized paper at a time.
• The paper size may be larger than the paper entry. Reverse the shredder to
remove the paper.
• Make sure that the paper is straight as it enters the paper feed.
