Using your microphone system
5
4
Plug the other end of the audio cable into the MIX IN or AUX IN on an external
amplifier.
5
Open the battery compartment, install two AA batteries into the battery
compartment, then close the compartment. Make sure that the + and – symbols on
the batteries align with the + and – symbols inside the battery compartment.
6
Slide the power switch to the ON position. The POWER indicator lights.
To install the microphone battery:
1
Unscrew the battery cover.
2
Insert the 9 V battery into the battery compartment. Make sure that the + and –
symbols on the battery align with the + and – symbols inside the battery
compartment.
3
Slide the cover to close the compartment.
Using your microphone system
To use your microphone system:
1
Turn on the receiver.
2
Turn on the microphone.
3
Adjust the volume on the amplifier, if necessary.
Troubleshooting
Caution:
Do not open the open the receiver case or microphone housing. There are no user
serviceable parts inside.
Symptom
Possible solution
Receiver is turned on, but POWER indicator
does not light.
• Make sure that the power cord is plugged
in securely.
• Make sure that the electrical outlet is
supplying power.
The AUDIO indicator lights when speaking
into the microphone, but there is no sound.
• Make sure that the volume control on the
amplifier is not set too low.
• Make sure that the audio cable is
connected securely to the receiver and
amplifier.
DX-M1114.fm Page 5 Wednesday, May 17, 2006 2:45 PM
