Dynex DX-L37-10A, Руководство по обслуживанию

Страница: 4 / 148

Main Unit (Front View/Side View/Rear View)
Channel Up/Down
Volume Up/Down
MENU
Input Source Select
Power On / Standby
Power Indicator
Remote Sensor
1. AC POWER: Connect the power cord to this jack, then plug the other end into a power outlet.
2. SERVICE PORT: For software update only. Do not use.
3. HDMI1: Connect a HDMI device to this jack.
4. VGA PIC/AUDIO: Connect a computer to these jacks.
5. COMPONENT IN: Connect a component video device to these jacks.
6. AV1INPUT: Connect an AV device to these jacks.
7. AUDIO OUT: Connect an audio device such as audio amplifier to these jacks.
8. RF: Connect an antenna or cable TV to this jack.
9. S-VIDEO: Connect an S-Video device to the jack, then connect the audio to the AV1 IN audio jacks.
10. RS-232: For service only. Do not use.
11. AV2 INPUT: Connect an AV device to these jacks.
12. HDMI2: Connect an HDMI device to this jack.
13. Headphone: Connect headphones to this jack.
11
12
13
2 4 3 5 6 7 8 9 10 1
DX-L26-10A
3