35
Using the Configuration Menu (continued)
Tools> Admin
At this page, the DX-E401 administrator can change the system password. There are
two accounts that can access the Cable/DSL Router’s Web-Management interface.
They are admin and user. Admin has read/write access while user has read-only access.
User can only view the settings but cannot make any changes.
Remote Management
Remote management allows the DX-E401 to be configured
from the Internet by a web browser. A username and password is still required to access
the Web-Management interface. In general, only a member of your network can browse
the built-in web pages to perform
Administrator
tasks. This feature enables you to per-
form Administrator tasks from the remote (Internet) host.
IP Address
The Internet IP address of the computer that has access to the Cable/DSL
Router. If you input an asterisk (*) into this field, then any computer will be able to access
the Router. Putting an asterisk (*) into this field would present a security risk and is not
recommended.
Port
The port number used to access the Cable/DSL Router.
Example
http://x.x.x.x:8080 where x.x.x.x is the WAN IP address of the Cable/DSL
Router and 8080 is the port used for the Web-Mangement interface.
Administrator
Password
admin
is the
Administrator login name
Enter the password and enter again to confirm
User
Password
user
is the
User login name
Enter the password and enter again to confirm
