Dynex DX-E102, Руководство пользователя

Страница: 7 / 16

Desktop 10/100Mb Network Card
7
Troubleshooting
If you are having problems with your network, check the following:
Verify adapter installation
If your adapter is not installed correctly, including the network system software or device
drivers, your network will not function correctly.
To verify that your adapter is correctly installed:
1 Click Start , then right-click My Computer and click Properties . The System
Properties window opens.
2 Click the Hardware tab and click Device Manager . The Device Manager window
opens.
3 Double-click Network adapters to display the list of network adapters.You see
Dynex DX-E102 PCI 10/100Mb Network Adapter .
If you see a yellow exclamation point or red X over the icon adjacent to Dynex PCI Adapter,
your adapter is not installed correctly or may have a problem. Double-click Dynex PCI
Adapter to read the explanation of the problem. This information will be helpful if you need
to contact a Dynex technical support.
Verify cable connections
• Make sure that the computer(s) you are troubleshooting are connected correctly.
• Each network adapter must be connected to the network with Category 5 UTP
(unshielded twisted pair) cables.
• Examine the network cables and make sure that they have not been damaged. Also,
make sure that no electromagnetic interference, like unshielded speakers or
appliances on the same circuit, is affecting your network.
• If you are using a hub, router, or switch, make sure that your network cables are not
plugged into a dedicated Uplink port. The Uplink port is only used when connecting
your hub to another hub or switch.
DX-E102-ENG.fm Page 7 Tuesday, October 20, 2009 7:43 PM