58
Dynex 50" LED TV
DX-50D510NA15
www.dynexproducts.com
Maintaining
• Do not use your TV in areas that are too hot or too
cold, because the cabinet may warp or the screen may
malfunction. Your TV works best in temperatures that
are comfortable to you.
• Storage temperatures are 32° to 122°F (0° to 50°C).
• Working temperatures are 41° to 104°F (5° to 40°C).
• Do not place your TV in direct sunlight or near a heat
source.
Cleaning your TV
• Before cleaning the screen, unplug your TV from the
power outlet.
• Clean your TV with a soft, lint-free cloth. If surfaces are
extremely dirty, use a soft cloth dampened with a
weak detergent solution.
• Use an eyeglass cleaner to clean the screen. Never use
alcohol, paint thinner, or benzine.
• Before using a chemically treated cloth, read the
instructions that came with the cloth.
• Do not spray insecticide liquid near your TV. Such
chemicals may cause damage and discoloration to the
exposed surfaces.
Troubleshooting
Restoring settings to default
1
Press
MENU
. The on-screen menu opens.
2
Press or to highlight
Settings
, then press
. The
Settings
menu opens.
3
Press or to highlight
Reset to Default
, then
press
ENTER
. A confirmation box opens.
4
Press or to select
Yes
(to reset all settings to
factory default), or
No
(to not reset). If you select
Yes
,
your TV turns off, then turns on again. The
SETUP
Wizard
opens.
5
Go through the
TV SETUP
wizard. For more
information, see “
Turning on your TV for the first
” on page
Viewing system information
You may need to view system information during
troubleshooting.
1
Press
MENU
. The on-screen menu opens.
2
Press or to highlight
Settings
, then press or
ENTER
. The
Settings
menu opens.
3
Press or to highlight
System Info
, then press
ENTER
. Information about the TV software version is
displayed.
4
Press
MENU
to return to the previous menu, or press
EXIT
to close the menu.
Warning
Do not try to repair your TV yourself.
Contact authorized service personnel.
Caution
When you restore default settings, all the
settings you have customized are reset.