26
Dynex 50" LED TV
DX-50D510NA15
www.dynexproducts.com
VGA (good)
1
Make sure that your TV’s power cord is unplugged and the computer is turned off.
2
Connect a VGA cable (not provided) to the
VGA
jack on the back of your TV and to the
VGA
jack on the computer.
3
Connect an audio cable (not provided) to the
PC/DVI AUDIO IN
jack on the back of your TV and to the
AUDIO OUT
(headphone) jack on the computer.
4
Plug your TV’s power cord into a power outlet, then turn on your TV and the computer.
5
Press
INPUT
to open the
INPUT SOURCE
list.
6
Press or to select
VGA
, then press
ENTER
.
7
Adjust the display properties on the computer, if necessary.
Audio cable
Back of TV
VGA cable
connector
Audio cable
connector
VGA
jack
PC/DVI
AUDIO IN
jack
On your TV
VGA cable