INSTRUCTION MANUAL
11
POWER ON/OFF
• When the appliance is plugged in to a power outlet, it powers on automatically.
• Touch the power symbol
and hold for
10 seconds
to turn off (or turn on) the appliance.
• Even if the unit is locked or unlocked, you can turn off the appliance by touching the power symbol
and
hold for
10 seconds
.
Warning:
To avoid damaging the compressor, please do not turn on the appliance again within
5 minutes
of turning it off.
UNLOCKING THE CONTROL PANEL
• To unlock the control panel, touch the power symbol and lighting symbol
with 2 fingers at the
same time and hold for
3 seconds
. When unlocked a buzzing sound will be heard.
• The control panel will be automatically locked with a buzzing sound after
10 seconds
without being
touched.
• When locked, the control panel will not react to any touch for Lighting or Power or Temperature Settings.
INTERIOR LIGHTING ON/OFF
• When locked, touch the lighting symbol
to turn on (or turn off) the interior cool LED lighting.
• The lighting will be on continuously if it is not turned off.
TEMPERATURE DISPLAY WINDOW
• The temperature is displayed digitally for accuracy. The display is shown as the set temperature when you
are setting the temperature, and it will display the internal temperature of the cabinet after
10 seconds
without being touched.
• If the temperature probe is malfunctioning, the display window will show w“HH” or “LL” instead of a figure
while a continuous buzzing sound will be heard. If this happens, this appliance is designed to keep running
periodically which helps to keep the inside cabinet cool to protect your stored wine.
Warning:
To avoid damaging your wine, it is strongly recommended to have the appliance
repaired immediately, as the periodic running can not ensure the appliance achieves the temperature you
have set.
TEMPERATURE SETTING
For Single Zone
• The temperature setting range is 5-22 ºC (41-72 ºF).
• Directly touch the
or
symbol to set the wine cooler temperature as you want.
• The first touch of the
or
symbol will recall the previous set temperature displayed in the display. If
the appliance runs after a power failure (or unplugging), the previous set temperature does not exist and is
replaced by the default temperature at 12ºC.
• Touch the symbol
to increase the set temperature by 1ºC. Alternatively, touch the
symbol to
decrease the set temperature by 1ºC.
• The display will change to the internal temperature of the cabinet after
10 seconds
without being touched.
