10
Adjusting the Sound Balance Between Speakers
It is important to adjust the sound volume of each pair of speakers to obtain the
best SuperStereo performance. This adjustment is done as follows.
3. When a pre-amplifier is used, you should set the
volume control of it as set by (5). When you use an
integrated amplifier you should set the volume con-
trol of it to the minimum position .
4. Select 3 of the MODE switch on the front panel of
SSP-5.
5. The FRONT MAIN/CENTER LEVEL control of
SSP-5 should be turned to minimum. The sound
level from the side speakers should now be at a
minimum.
6. The FRONT/REAR BALANCE control of SSP-5
should be turned to the center as at 12 o'clock.
7. Now play some music.
8. The MASTER VOLUME control of the SSP-5
should be turned up gradually and a check made to
ensure there is sound from the front and rear speak-
ers, but there will not yet be any sound from the side
speakers.
9. The FRONT/REAR BALANCE control of SSP-5
should be turned to the right gradually and you
should adjust it to give the best SuperStereo effect
at your listening position.
When the FRONT/REAR BALANCE control is
turned to the left the sound volume from the rear
speakers will be reduced, and when the control is
turned to the right the sound volume of the front
speakers will be reduced.
10. The FRONT MAIN/CENTER LEVEL control of
SSP-5 should be turned to the right gradually to the
point which gives the best and most natural sound
reproduction.
11. Once you have set the FRONT/REAR BALANCE
control and the FRONT MAIN/CENTER LEVEL con-
trol so as to gives the best result; you should from
now on adjust the sound volume just by the MAS-
TER VOLUME control.
1. The MASTER VOLUME control of SSP-5 should
be turned to the minimum.
2. The volume control of each power amplifier should
be turned up to the maximum.
