8
9
Dynaudio LYD Series
Personal Reference Monitor
Important safety information
Important
safety
information
The lightning flash with an arrowhead symbol
within an equilateral triangle, is intended to alert the
user to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that may
be of sufficient magnitude to constitute a risk of
electric shock to persons.
1.
Read these instructions.
2.
Keep these instructions.
3.
Heed all warnings.
4.
Follow all instructions.
5.
Do not use this apparatus near water.
6.
Clean only with dry cloth.
7.
Install in accordance with the
manufacturer’s instructions.
8.
Do not install near any heat sources
such as radiators, heat registers, stoves,
or other apparatus (including amplifiers)
that produce heat.
9.
Do not defeat the safety purpose of
the polarized or grounding-type plug. A
polarized plug has two blades with one
wider than the other. A grounding type
plug has two blades and a third grounding
prong. The wide blade or the third
prong are provided for your safety. If the
provided plug does not fit into your outlet,
consult an electrician for replacement of
the obsolete outlet.
10.
Protect the power cord from being
walked on or pinched particularly at plugs,
convenience receptacles, and the point
where they exit from the apparatus.
11.
Only use attachments/accessories
specified by the manufacturer.
12.
Use only with the cart, stand, tri-
pod, bracket, or table specified by the
manufacturer. When a cart is used, use
caution when moving the cart/apparatus
combination to avoid injury from tip- over.
13.
Unplug this apparatus during lightning
storms or when unused for long periods
of time.
14.
Refer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as powersupply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus, the
apparatus has been exposed to rain or
moisture, does not operate normally, or
has been dropped.
Warning!
To reduce the risk of fire or electrical shock, do not
expose this equipment to dripping or splashing
and ensure that no objects filled with liquids, such
as vases, are placed on the equipment
This apparatus must be earthed.
Use a three wire grounding type line cord like the
one supplied with the product.
Be advised that different operating voltages
require the use of different types of line cord
and attachment plugs.
Always observe the local safety regulations.
Ensure that the factory-set power requirements
for the device (refer to the label on the back of
the monitor) corresponds to the mains supply
in your region.
This equipment should be installed near the
socket outlet and disconnection of the device
should be easily accessible.
To completely disconnect from AC mains,
disconnect the power supply cord from the AC
receptacle.
The mains plug of the power supply shall remain
readily operable.
Do not install in a confined space.
Do not open the unit – risk of electric shock inside.
Caution:
You are cautioned that any change or modifications
not expressly approved in this manual could void
your authority to operate this equipment
Service:
There are no user-serviceable parts inside.
All service must be performed by qualified
personnel.
Disposal
Disposal of used electrical and electronic
equipment (applicable in European countries with
separate collection systems for this equipment)
This symbol on the product or its packaging
indicates that the product may not be treated as
household waste. Instead it must be handed over
to the applicable collection point for the recycling
of electrical and electronic equipment. By ensuring
this product is disposed of correctly, you will help
prevent potential negative consequences for the
environment and human health. The recycling of
materials helps to conserve natural resources.
For more detailed information on recycling this
product, please contact your local authority,
community waste disposal of, or the shop where
you purchased the product.
EMC/EMI
This equipment has been tested and found to
comply with the limits for a Class B Digital device,
pursuant to part 15 of the FCC rules.
These limits are designed to provide reasonable
protection against harmful interference in
residential installations. This equipment generates,
uses and can radiate radio frequency energy and,
if not in- stalled and used in accordance with
the instructions, may cause harmful interference
to radio communications. However, there is no
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
product.
guarantee that interference will not occur in a
particular installation. If the equipment does
cause harmful interference to radio or television
reception, which can be determined by turning
the equipment off an on, the user is encouraged
to try to correct the interference by one or more
of the following measures.
Reorient or relocate the receiving antenna.
Increase the separation between the equipment
and receiver.
Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
Consult the dealer or an experienced radio/TV
technician for help.
For customers in Canada:
This Class B digital apparatus complies with
Canadian ICES-003.
Cet appareil numérique de la classe B est
conforme à la norme NMB-003 du Canada.
