manualshive.com logo in svg

Dynaudio Focus XD, Руководство пользователя

Поделиться
Скачать
Dynaudio Focus XD Скачать руководство пользователя страница 19

P19

dynaudio.com/focusxd

 Adjusting The Loudspeaker's Sound  / Connecting The Voltage Supply

  Use the supplied power cable to 

connect the loudspeakers to the mains 
voltage and switch it on using the 
power switch (POWER) on the rear 
(position: I).

Switching on/standby mode

To switch the loudspeaker on from 
standby mode:

  Point the remote control at the 

loudspeaker and press the 

ON

 button.

The loudspeaker will automatically 
search for an audio signal or an 
active hub. If found, the signal will be 
output.

 If there is no input signal, the 

loudspeaker will go into standby mode 
after a certain period.

  To switch it back on, press 

ON

 or start 

music playback. 

To switch a loudspeaker out of 
operation to standby mode:

  Point the remote control at the 

loudspeaker and press the 

OFF

 

button. 

The loudspeaker will go into 

standby mode. To completely switch 
off the loudspeaker, turn the 

POWER

 

switch on the rear to 

O

. However, the 

loudspeaker can then no longer be 
switched on via the remote control.

Connecting  

the voltage 

supply

Note

Before connecting the device, 
check whether the mains voltage 
listed on the rear side of the 
speakers matches that present  
at the installation site.

Содержание Focus XD





























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды