Owner’s Manual Focus XD
17
16
dynaudio.com/focusxd
Connecting the analog signal source / Operating the loudspeaker without controlling the volume
Connecting the analog signal
source
The loudspeakers can also output signals
from an analog signal source. The signal
source is connected to the analog inputs.
1. Connect the left analog output from
the signal source to the analog
input (Analog Audio IN) on the left
loudspeaker.
2. Connect the right analog output
from the signal source to the analog
input (Analog Audio IN) on the right
loudspeaker.
3. Operate one loudspeaker as master
and the other as slave by setting the
respective switch (Channel Mode)
correspondingly on the rear side of the
housing. The assignment of master and
slave is irrelevant.
Operating the loudspeakers
without controlling the volume
You can also operate the loudspeakers
without controlling the volume yourself.
The amplifiers integrated into the
loudspeakers function as a power
amplifier; volume is controlled via the
source signal (e.g. pre-amplifier).
1. Connect the left analog output from
the signal source to the analog
input (Analog Audio IN) on the left
loudspeaker.
2. Connect the right analog output
from the signal source to the analog
input (Analog Audio IN) on the right
loudspeaker.
3. Set the Channel Mode switch on the
back side of the housing to External.
Connecting only one
loudspeaker with a cable
1. Connect the digital output for the signal
source to the digital input
(Digital
Audio IN)
on one loudspeaker. You can
choose whether to use the right or left
loudspeaker.
2. Operate the connected loudspeaker as
master by setting the
Channel Mode
switch on the rear side of the housing
to
Master
.
3. Operate the other loudspeaker as slave
by setting the
Channel Mode
switch
on the rear side of the housing to
Slave
.
Operating the loudspeakers
via a Hub or Connect
Dynaudio’s innovative Connect system
offers the option to operate the loud-
speakers completely wirelessly. The
connection to the loudspeakers is
established by either a Dynaudio Hub or
Connect box to which the analog and/
or digital sources can be connected. For
more details, please refer to the Connect
Owner’s Manual or learn more at http://
www.dynaudio.com/home-audio/connect/
1. Install and configure the Connect
system according to the Connect
owner’s manual.
2. On the rear side of the housing,
select the
red
,
green
, or
blue
zone. Loudspeakers that belong to
a common zone can be operated
together using the remote control.
3. Operate one loudspeaker as master
and the other as slave by setting the
respective switch (Channel Mode)
correspondingly on the rear side of the
housing. The assignment of master and
slave is irrelevant.
Operating via Hub or Connect.
Operating with a cable.
Connecting the analog signal source.
High sound pressure levels
In the External operating mode, signals
are amplified at the maximum. Connecting
a signal source with an uncontrolled or
maximum level can harm your hearing and
cause damage to the components.
►
Only connect controllable signal
sources.
►
Before switching on the loudspeakers,
turn down the volume for the signal
source using its volume control.
Connecting the digital signal source
Содержание Focus 20 XD
Страница 1: ...Owner s manual Focus XD ...
