Dynaudio Contour, Руководство пользователя

Страница: 14 / 23

attenuate the room-induced boost in the low frequency range by dampening the deep frequencies, yielding a
more clear and tight sound when the loudspeaker is positioned near rear walls.
▪
Fully insert the foam port plugs packed with your loudspeaker into the bass reflex port, to attenuate the bass output (if
required).
▪
If the attenuation of the bass volume is too high (bass level too low) remove the inner part of the foam plug. Then fully
insert the foam ring in the bass reflex port. Make sure the ring is formed in a concentric circular shape within the port to
prevent reduced and turbulent airflow.
CAUTION
Spikes with sharp peaks
The sharp peaks of the spikes may cause injuries and damage sensitive surfaces like hardwood flooring or tile.
▪
Be careful when handling the loudspeakers.
▪
Place plates between the spikes and the surface to protect the underlying surface.
Floor-standing loudspeaker setup
The floor-standing models feature a special base construction, which offers both an ideal performance and
mechanical basis. Integrated into the base plinth are four individual spike assemblies. These stabilize the cabinet
on an extremely small contact area, and therefore prevent any wobbling while offering optimal resonance control.
The individually adjustable spikes allow levelling of the cabinet on uneven floors.
Compact loudspeaker setup
The compact model is designed to offer exceptional performance while taking up minimal space. The speakers
will realize their optimum performance when used in conjunction with a dedicated stand (such as the Dynaudio
Stands) to position them at the proper height while absorbing any resonance.
Due to its dimensions, you can also place the loudspeaker on a ledge or shelf or on top of furniture. But to avoid
the possibility of any negative influence on sound quality, one should take care to utilize a stable surface offering a
wide enough space in front of the loudspeakers as not to limit the sound quality and performance. In such
applications or if placing the speakers in enclosed audio/video furniture, the bass reflex port can usually be left
unplugged as long as there is minimal clearance to the boundaries at the top and rear of the loudspeaker cabinet.
14 Contour User manual