Dynaudio BM Compact mkIII, Руководство пользователя

Страница: 4 / 16

Introduction
2 BM Compact mkIII
– Be advised that different operating volt-
ages require the use of different types
of line cord and attachment plugs.
– Always observe the local safety regula-
tions. Ensure that the factory-set power
requirements for the device (refer to the
label on the back of the monitor) cor-
responds to the mains supply in your
region.
– This equipment should be installed
near the socket outlet and disconnec-
tion of the device should be easily ac-
cessible.
– To completely disconnect from AC
mains, disconnect the power supply
cord from the AC receptacle.
– The mains plug of the power supply
shall remain readily operable.
– Do not install in a confined space.
– Do not open the unit – risk of electric
shock inside.
Caution:
You are cautioned that any change or mod-
ifications not expressly approved in this
manual could void your authority to operate
this equipment.
Service
– There are no user-serviceable parts in-
side.
– All service must be performed by quali-
fied personnel.
EMC/EMI
This equipment has been tested and found
to comply with the limits for a Class B Dig-
ital device, pursuant to part 15 of the FCC
rules.
These limits are designed to provide rea-
sonable protection against harmful inter-
ference in residential installations. This
equipment generates, uses and can radi-
ate radio frequency energy and, if not in-
stalled and used in accordance with the in-
structions, may cause harmful interference
to radio communications. However, there is
no guarantee that interference will not oc-
cur in a particular installation. If the equip-
ment does cause harmful interference to
radio or television reception, which can be
determined by turning the equipment off an
on, the user is encouraged to try to correct
the interference by one or more of the fol-
lowing measures.
– Reorient or relocate the receiving an-
tenna.
– Increase the separation between the
equipment and receiver.
– Connect the equipment into an outlet
on a circuit different from that to which
the receiver is connected.
– Consult the dealer or an experienced
radio/TV technician for help.
For customers in Canada:
This Class B digital apparatus complies
with Canadian ICES-003.
Cet appareil numérique de la classe B est
conforme à la norme NMB-003 du Canada.
Dynaudio Professional BM Compact mkIII manual.indd 2 2014-02-24 10:56