Dynatronics Dynatron 525 Скачать руководство пользователя страница 31 | Manualshive

Страница: 31 / 109

background image

InTerferenTIal / PremodulaTed InsTruCTIons

DYNATRON® 25 SERIES™ | OPERATOR’S MANUAL

25

Interferential / Premodulated

Instructions

An Interferential treatment uses two channels and four electrodes (channel pairs 1-2 or 3-4). The device will automatically
select the first available channel pair when you select IFC. A Premodulated treatment uses one channel and two electrodes.
The device will automatically select the first available channel (1, 2, 3, or 4) when PREMOD is selected. If desired, multiple
treatments can be setup using available channels. Note: Channels 3 and 4 are only available on the 925 and 625 devices.

Detailed Interferential / Premodulated Setup

1. IFC or PREMOD MODALITY keys

Press the IFC or PREMOD MODALITY keys to choose IFC (Interferential) or PREMOD (Premodulated). When
you choose IFC, two channels are automatically selected: 1-2 or 3-4. When choosing PREMOD, the first available
single channel is selected. Make sure the patient lead(s) is plugged into the correct jack(s) for the channel(s) selected.
The default settings for the modality are automatically selected. If you wish to use the default settings, increase the
intensity to the desired level, and press START.

Default Settings

Time:..........................................10 minutes

Frequency

Range: ...........High 80-150 Hz

Target

(IFC): .......................................... On

NOTE: Prior to increasing intensity, electrodes must be placed on the patient and the lead(s) attached to the device.

Plug the lead(s) into the channel(s) the device selects for this treatment. Consult published sources for electrode
placements, treatment settings, and treatment times. Make sure electrodes make good contact with the patient’s skin
over the entire surface area of the electrode. Improper electrode contact may result in patient injury.

«
...
29
30
31
32
33
...
»

Содержание Dynatron 525














































































































Отзывы:

Нет отзывов

Похожие инструкции для Dynatron 525

Бренд: ABB Страницы: 50

ACS880-01 Series

Бренд: ABB Страницы: 17

Бренд: ABB Страницы: 36

Бренд: FENDT Страницы: 31

Бренд: GE Страницы: 698

Бренд: lancer Страницы: 12

Бренд: CAIRE Страницы: 2

Бренд: Rangevision Страницы: 28

Бренд: Pari Страницы: 50

Бренд: Icare Страницы: 42

Бренд: Varytec Страницы: 5

Бренд: Saab Страницы: 98

Бренд: Kaixin Страницы: 89

Бренд: Nel-Tech Labs Страницы: 8

Бренд: Xaoc Devices Страницы: 8

2261998USBA1-XX

Бренд: MMF POS Страницы: 5

Бренд: Woodward Страницы: 62

Бренд: Qtx Страницы: 6

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды