15
Setting Up Your Piano
CONNECTING AUDIO DEVICES
Line out jacks
(Standard phone jacks of
L/Mono
and
R
)
When these are connected, you can use the instrument's
MASTER VOLUME
control to adjust the
volume of the sound output to the external device.
Connect the instrument's
Line Out 'L/Mono'
and
'R'
jacks and the input jacks of a pair of powered
speakers using appropriate audio cables. Use only the
L/Mono
jack for connection with a monaural
device.
Line in jacks
(Standard phone jacks of
L/Mono
and
R
)
The stereo outputs from another instrument can be connected to these jacks, allowing the sound of
an external instrument to be reproduced via the instrument's speakers.
Connect the output jacks (LINE OUT etc.) of an external synthesizer or the tone generator module and
the instrument's
Line In 'L/Mono'
and
'R'
jacks using appropriate audio cables.
CAUTION
When the sound of an external device is output to the instrument, first turn on the power to the external device, then to the
instrument. Reverse this order when you turn the power off.
BOTTOM PANEL
CONNECTING OTHER DEVICES
Connecting the external MIDI devices
(MIDI Terminals)
Use the built-in
MIDI
terminals and standard MIDI cables to connect external MIDI devices.
MIDI IN
Receives MIDI messages from an external MIDI device.
MIDI OUT
Transmits MIDI messages generated by the instrument.
What's MIDI?
MIDI(Musical Instrument Digital Interface) is the international standard for digital communication of electronic musical
instrument data.
This means that any equipment that has a MIDI terminal (such as electronic musical instruments or personal computers ) can easily
exchange digital data with other MIDI equipment without complicated conversions or connections.
Connecting a computer
(USB Terminal)
By connecting a computer to the USB, you can transfer data between the instrument and the
computer via MIDI, and take advantage of sophisticated computer music programs. Keep in mind
that you also need to install an appropriate USB MIDI driver.
The instructions below explain how to connect and use the terminals.
CAUTION
-
Precautions when using the USB terminal.
When connecting the computer to the USB terminal, make sure to observe the following points. Failing to do so risks freezing
the computer and corrupting or losing data. If the computer or the instrument freezes, turn the power to the instrument off
and restart the computer.
Before connecting the computer to the USB terminal, exit from any power-saving mode of the computer (such as suspended,
sleep, standby), and quit any open application software, also turns off the power to the instrument.
Execute the following before turning the power to the instrument off or unplugging the USB cable to/from the
instrument/computer.
- Quit any open application software on the computer.
- Make sure that data is not being transmitted from the instrument. (Data is transmitted only by playing notes on the keyboard
or playing back a song.)
- While a USB device is connected to the instrument, you should wait for six seconds or more between these operations: When
turning the power of the instrument off then on again, or when alternately connecting/disconnecting the USB cable.
Содержание VGP-3000
Страница 84: ...Part No 11958231 D Y N A T O N E C O R P w w w d y n a t o n e b i z ...
Страница 86: ...Part No 11958232 ...
Страница 88: ...Part No 11958233 ...