Main Voice Volume
B
a
si
c C
o
n
tr
o
ls
M
a
in
V
o
ic
e
v
o
lu
m
e
/ T
w
in
P
ia
n
o
15
By adjusting the Main Voice volume, the balance between volumes of different voices
(Main/Layer/Split) may be adjusted.
w
When you're done adjusting, release SETUP to return to performing mode.
☞
To cancel the SETUP mode LOCK, press
LOCK
again. The buttons will turn off, allowing the piano to return to performing mode.
q
Enter the SETUP mode.
Press and hold down
SETUP
, then use the MAIN VOICE VOLUME Up/Down buttons to adjust the Main
voice volume. The LED will display the current value.
☞
Pressing both
Up/Down
buttons simultaneously will restore the default value (100).
☞
The
DATA Up/Down
buttons may be used instead of the
MAIN VOLUME
buttons.
☞
The numerical range of the volume is 0-100.
☞
Keep a button pressed to quickly navigate through the values.
☞
To stay in SETUP mode: The piano may stay in SETUP mode instead of leaving it once the
SETUP
button is released.
1) While in SETUP mode, press
LOCK.
The LED screen will stay where it is even if SETUP is released afterwards.
2) Pressing
LOCK
while not pressing SETUP will also trigger and lock in the SETUP mode.
Twin Piano
Twin Piano divides the piano keyboard into two equal smaller ("twin") keyboards with identical range
of octaves. This allows two people to play the piano simultaneously on the same octaves.
q
Select a voice.
Refer to Page 13 for voice selection.
w
Press TWIN.
The button will be lighted, and the keyboard will be divided into two parts, with D#4 as the point of
division. The two parts will play in same range of octaves.
e
Press TWIN once again to quit using TWIN PIANO.
The button will turn off, indicating that TWIN PIANO is no more active.
☞
When in TWIN PIANO mode, the Layer, Split, and Recording features may not be used.
