You can set the point dividing the right and left parts of the keyboard at any desired key position.
Hold down the SPLIT button and press the desired key to assign it as the new split point.
The LCD screen will display the corresponding number of the chosen key.
▼
SPLIT(Default G3 , 35)
Basic Operation
Changing
the
S
plit point / Reverb
13
Changing the Split Point
Reverb
Reverb is an effect that recreates the decaying reflections of a sound in a performance
space, and reproduces the special ambience of a concert hall.
REVERB ON/OFF
To turn on the reverb, press the
REVERB
button. The
lamp will be lighted to indicate that the reverb is now
active.
To turn off the reverb, press the
REVERB
button again. The lamp will be off, indicating that the
reverb is no more active.
☞
Reverb is set ON by default.
☞
The type and volume of reverb may be adjusted in the setup mode.(See the
SETUP
section on page
15
,
17
.)
w
Call up the Split mode.
To call up the split mode, press the
SPLIT
button. The lamp will begin flashing; the LCD
screen will display the number of current split voice.
e
Select the split voice.
Select the voice while the split button is flashing.
☞
Volume of the split voice can be adjusted independently in the setup mode.
(See the
SETUP
section on page
16
.)
☞
Key number of the lowest note is
'
01
'
.
☞
The default voice is 'A
07
'
ACOUSTIC BASS
in the split mode.
DPP-510 Rev1_02 EN (171102) with Cover_내내 2017-11-03 내내 2:50 Page 13
