DYNATEK DFCM-1 Скачать руководство пользователя страница 2

Страница: 2 / 5

Remove the seat and airbox assembly. Move
the ECU out of the way. Remove the battery
cover.

Connect the FIC ground to the battery
ground.

Reinstall the battery cover, and reinstall the
ECU. Using the supplied velcro, mount the
FIC.

Route the wiring harness from the FIC under
the tank and through the frame.

STEP

STEP 3

STEP 2

Installation

Part# DFCM-1

STEP

STEP 1

Содержание DFCM-1

Страница 1: ... Wire ties Velcro Strip Alcohol Swab 2002 2005 Honda VTX1800 Part Number DFCM 1 2801191 Rev 06 28 05 Congratulations on your purchase of this Dynatek product Please take a moment to read these instructions completely before installing the FI controller The installation will only take a few minutes but proper setup for your specific bike will take longer ...

Страница 2: ...cover Connect the FIC ground to the battery ground Reinstall the battery cover and reinstall the ECU Using the supplied velcro mount the FIC Route the wiring harness from the FIC under the tank and through the frame STEP 1 STEP 3 STEP 2 Installation Part DFCM 1 2 STEP 3 STEP 2 STEP 1 ...

Страница 4: ...a yellow stripe Using the supplied wire tap tap into that wire Make sure that the tap is on the wire securely Connect the grey wire from the FIC harness to this connector Reinstall the seat and airbox assembly STEP 7 STEP 7 Installation Part DFCM 1 4 ...