The WSA-5RP wireless Transmitter and Receiver are automatically paired and synced at
the factory, both LEDs should be solid Blue in 5.8G mode as default when powered on.
In order for the transmitter to transmit to receiver, they need to be paired. If the front
panel LEDs are blinking on one or both units, do the following:
Flashing Slowly:
No paired wireless device detected
Flashing Quickly:
Pairing Mode
Solid Blue:
5.8G mode (as at factory default)
Solid Green:
5.2G mode (optional setup)
Pairing the WSA-5RP transmitter and wireless amplifier receiver
Description of the network status LED light
-8-
We
use
the
latest
5.8G
wireless
technology
connection
with
62
channels
auto
selection
from
RF
channel
5727~5848,
which
are
not
easily
disturbed
by
2.4G
(the
frequency
band
of
bluetooth
and
WIFI)
and
have
excellent
transmission
stability,
also
avoids
and
decrease
possibility
of
interference
from
the
wireless
networks
routers,
cell
phone,
garage
doors,
R/Cs,
and
other
2.4G/5.8GHz
frequency
devices.
However,
if
you
experience
any
interference
in
the
5.8G
mode,
you
could
try
to
use
the
5.2G
mode
with
44
RF
channel
5157~
5243
(option)
3. Long press “M” paring button again on both units to confirm the channel selection
2. Ensure both the Transmitter and Receiver show the same LED colour.
1. Short press the “M” paring button on the Transmitter and Receiver to toggle between
the 5.8GHz (blinking Blue LED) channels, and the 5.2GHz (blinking Green LED)
4.
Successful
pairing
is
indicated
by
a
solid
Blue
(or
Green)
LED
on
both
the
Transmitter
and
Receiver.
Содержание WSA-5RP
Страница 9: ...TroubleShoot 9...
