Dynaset HPW 1000, Руководство пользователя

Страница: 8 / 62

8
Dynaset Oy | Menotie 3, FI-33470 Ylöjärvi, Finland | tel: +358 3 3488 200 | info@dynaset.com | www.dynaset.com
HIGH PRESSURE WATER PUMPS
GENERAL
1.2. PRODUCT IDENTIFICATION KEY
Picture 1: Identification key for HPW pumps
1. Product Group HPW Hydraulic Power Washers
2. Maximum water pressure that HPW pump can produce (40-1600 bar).
3. Maximum water flow or other pumping fluid flow that moves through HPW pump
(15-300l/min).
4. Maximum hydraulic oil flow from the base machine required to run HPW pump
(8-350 l/min).
5. Options (listed below)
Water unloader valve (ST/PA)
The unloader valve directs water flow into bypass when the high pressure
water output is closed or not needed. In HPW200 pumps water unloader valve
is ST-model, other HPW pumps has PA-model.
Flow limiter (VR)
Limits the oil flow from the base machine. This function allowes to use the HPW
pump with partial load instead of maximum flow.
Pressure reducing valve (PA)
Reduces the oil pressure from the base machine. This function gives possibili-
ties to drive HPW pump with partial load instead of maximum pressure.
Load Sensing (LS)
Load Sensing on PT-flange. Senses and provides only the pressure and flow
required by the HPW pump. This function saves significantly energy and custo-
mer’s expenses preventing excessive part wear in long term.
Marine (M)
For marine use. Pipes of unloader valve and all bolts are made of stainless steel.
Center body and heads stainless steel (AIS)
The center body and the heads of the pump are made of stainless steel.
Center body and heads aluminium bronze (AB)
The center body and the heads of the pump are made of aluminium bronze.