D016
-
047
-
1 LeakVIEW User Guide Page 3 of 22
SAFETY INSTRUCTIONS
•
Do not subject the test chamber to differential temperature fluctuations.
•
Disconnect the power supply before opening the connection box.
•
Do not allow any liquid to come in contact with any electrical component.
•
The system must only be filled with water that is of a temperature not greater
than the ambient temperature as the test chamber.
•
Do not subject the test chamber to shock, especially when under vacuum.
•
Do not allow the test chamber to come into contact with substances that can
attack the acrylic.
•
Do not allow the weight of the test chamber to rest on the drain tap.
•
Do not exceed the stated air supply pressure.
•
Do not exceed the stated vacuum level.
•
Do not attempt to relocate the system when it is filled with liquid.
•
The compressed air supply should be isolated when not in use.
•
This manual should be read and understood in its entirety before installation
or operation of the LeakVIEW system.
SAFETY INSTRUCTIONS
