Reorder
No. 10440
DynaRest
™
Alternating Pressure
Pump and Pad System
USER MANUAL
INTENDED USE
The DynaRest
™
Alternating Pressure Pump and Pad System is intended
to reduce the incidence of pressure ulcers while optimizing patient comfort.
PRODUCT FUNCTIONS
Pump
The functions of the pump are described below.
Please refer to the figures of the pump
.
(1) Power Switch
Turn ON/OFF the power, the pump will
start/stop operation.
(2) Pressure Adjust Knob
Turn the soft/firm knob to set a comfortable
pressure level.
(3) Air Pressure Valve
Connect the air tubes securely into the air
pressure valve of the pump.
OPERATING INSTRUCTIONS
• Place pump on horizontal surface or hang it by means of the hook.
• Open the bubble pad on to the bed. Secure the pad to your mattress by tucking in
the end flaps under your mattress at the head and foot areas.
• Connect air tubes securely into the air pressure valve of the pump. Ensure that the tubes
are airtight and not kinked or twisted. Allow space for the bed rails to drop freely.
• Plug the pump into a suitable electrical power source and switch on.
The switch indicator should now illuminate.
• Allow 20-30 minutes for mattress to inflate fully.
• Cover with a sheet and tuck loosely.
• Use pressure adjustable knob to give maximum patient comfort.
ENVIRONMENT REQUIREMENTS
• Operation Temperature: 50°F~95°F (10°C~35°C)
• Storage Temperature: 5°F~122°F (-15°C~50°C)
• Operation Humidity: 20%~80% non-condensing
• Storage Humidity: 10%~90% non-condensing
2
1
3
SOFT
FIRM
