background image

Reorder 

No. 10440

DynaRest

Alternating Pressure

Pump and Pad System

USER MANUAL

INTENDED USE

The DynaRest

Alternating Pressure Pump and Pad System is intended

to reduce the incidence of pressure ulcers while optimizing patient comfort.

PRODUCT FUNCTIONS

Pump

The functions of the pump are described below.

Please refer to the figures of the pump

.

(1)  Power Switch

 

Turn ON/OFF the power, the pump will

 

start/stop operation.

(2)  Pressure Adjust Knob

 

Turn the soft/firm knob to set a comfortable

 

pressure level.

(3)  Air Pressure Valve

 

Connect the air tubes securely into the air

 

pressure valve of the pump.

OPERATING INSTRUCTIONS

• Place pump on horizontal surface or hang it by means of the hook.
• Open the bubble pad on to the bed. Secure the pad to your mattress by tucking in

  the end flaps under your mattress at the head and foot areas.
• Connect air tubes securely into the air pressure valve of the pump. Ensure that the tubes

  are airtight and not kinked or twisted. Allow space for the bed rails to drop freely.
• Plug the pump into a suitable electrical power source and switch on.

  The switch indicator should now illuminate.
• Allow 20-30 minutes for mattress to inflate fully.
• Cover with a sheet and tuck loosely.
• Use pressure adjustable knob to give maximum patient comfort.

ENVIRONMENT REQUIREMENTS

• Operation Temperature: 50°F~95°F (10°C~35°C)
• Storage Temperature: 5°F~122°F (-15°C~50°C)
• Operation Humidity: 20%~80% non-condensing
• Storage Humidity: 10%~90% non-condensing

2

1

3

SOFT

FIRM

Отзывы: