manualshive.com logo in svg

Dynapac F1000T, Руководство по эксплуатации и техническому обслуживанию

Поделиться
Скачать
Dynapac F1000T Скачать руководство пользователя страница 106

D 2.0 10

D_2.0_

01_U

S.fm 1

0

-24

Main Menu - Diagnostics 

 

-Fault Pop-Up Alarms

When a fault is detected on 

the CAN network, a flashing 

red warning alarm will be ac-

tivated and a fault informa-

tion pop-up window will be 

displayed listing current fault 

information.

 

Warning lights will flash when 

a popup alarm occurs and 

will stay flashing until ac-

knowledged. 

 

Warning lights will remain lit 

until the fault is no longer on 

the CAN network.

Fault pop-up softkey actions

:

Fault Pop-Up Alarms

-

Faults no longer active will also be displayed in the Previous Faults log.

-

Faults that have been acknowledged and are no longer active will be shown in the 

Currently Active Faults log in italics.

-

Pop-up fault alarms can be disabled by setting the Fault Pop-Up to off in the CAN 

section of the System.

-

Select to clear pop up and return directly to previous 

screens

-

Scroll between screens and within screens.

-

Scroll between screens and within screens.

-

Confirm any selections or acknowledge any fault/

warning and to go back to normal screen.

Содержание F1000T















































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды