Dynapac DRP20, Руководство по эксплуатации

Страница: 75 / 112

8.7 Semi-annually
8.7.1 Changing the engine oil
Perform this maintenance work at the latest after
100 operating hours
NOTICE!
Danger of engine damage!
– Change the oil only with the engine at oper-
ating temperature.
– Use only oil of the permitted specification
Ä
Chapter 8.2.1 „Engine oil“ on page 67 .
– Filling quantity: Ä Chapter 8.3 „List of fuels and
lubricants“ on page 69
Protective equipment: n Working clothes
n Protective gloves
1. Park the machine in secured condition
Ä
Chapter 6.4
„Parking the machine in secured condition“ on page 57 .
2.
WARNING!
Danger of burning on hot components!
– Wear your personal protective equipment
(protective gloves, protective clothing).
– Avoid touching hot components.
Clean the area around oil dipstick (1) and drain plug (2).
3. Unscrew the oil dipstick.
4. Unscrew the drain plug and collect any oil running out.
5. Clean the drain plug and screw it back in, tightening torque:
15 Nm (11 ft
·
lbf).
6. Fill in fresh oil up to the bottom edge of the filler bore.
7. Screw the oil dipstick in.
8. Check for leaks after a short test run.
9. Check the oil level on the dipstick, correct if necessary.
10. Dispose of oil in an environmentally friendly way.
Fig. 57
Fig. 58
Maintenance – Semi-annually
DRP20 75