Operation - Before starting
2018-02-08
4812325555EN
39
View
Before starting the engine, make sure that the view around the
machine is unobstructed.
All the cab windows shall be clean and the rear view mirrors
adjusted for a good rear view.
Operator position
If a ROPS (Roll Over Protective Structure) or a cab is fitted to
the roller, always use the seat belt (1) and wear a protective
helmet.
Always replace the seat belt for a new one if the
previous show signs of wear or has been
subjected to a huge impact.
The safety railings (2) around the operator's station
are adjustable both in the inner and outer positions.
Retract them when driving close to walls or other
side obstacles.
Release the locking knob (3) and adjust and lock the railings in
the desired position.
Make sure the anti-slip protections (4) of the
platform are in good condition and replace
them for new ones if they are worn.
If the machine is fitted with a cab, make sure
the door is always closed when in motion.
Interlock
The roller is equipped with Interlock.
The Diesel engine turns off after 4 seconds if the operator
leaves the seat when the machine is moving forward/backward.
If the machine is in neutral position when the operator leaves
the seat, a horn is sound until the parking brake is activated.
If the parking brake is activated, the Diesel engine will not stop,
but the engine will be automatically turned off if, by any
reasons, the transmission is not in the neutral position when the
operator is not seated in his place.
Sit down for all operations!
4
Fig. - Operator's seat
1. Seat belt
2. Safety railings
3. Locking knob
4. Anti-slip protections
