Dynapac CP 132, Руководство по обслуживанию

Страница: 13 / 27

11
CP 132 M132EN3
Scrapers – Check / Adjustment
EVERY 10 HOURS OF OPERATION (Daily)
1
Fig. 7 Scrapers
1. Scraper blade
2. Adjustment screw
2
Sprinkler system
– Checking / Cleaning
Check the sprinkler system for proper operation.
Solenoid (5) valve must emit sound to indicate that it is
working.
Start the sprinkler system and make sure that no
nozzle is blocked. If necessary, clean any clogged
nozzle.
The filter (3) is accessible for cleaning after you have
emptied the tank (2) and removed the filter bowls.
Empty the bowls and clean them using water. Listen, or
place a hand on the pump (4), to ensure that it is
working.
It is not necessary to empty the tank to clean the filter if
the machine has a stop valve (6). It is enough to turn
off the water.
Check that the scraper blades (1) touch the tire surface
evenly. Blades can be adjusted for full and even tire
contact.
If necessary, adjust the distance to the tire as follows:
Undo the two screws (2) holding the scraper blade.
Position the scraper blade (1) then retighten the
attachment screws.
Adjust all scraper blades in the same way.
Fig. 8 Sprinkler system
1. Filler cap/strainer
2. Tank
3. Filter
4. Water pump
5. Solenoid valve
6. Shut off valve
7. Drain plug
1
2
5
4
3
6
7