Dynapac 10000333x0A000001, Инструкция по эксплуатации

Страница: 72 / 105

Maintenance - Maintenance schedule
ICC1200C-1EN3.pdf 2012-05-16
Remove all dirt before filling, when checking
oils and fuel and when lubricating using oil or
grease. Remove all dirt before filling, when checking
oils and fuel and when lubricating using oil or
grease.
The manufacturer’s instructions found in the
engine manual also apply. The manufacturer’s instructions found in the
engine manual also apply.
Every 10 hours of operation (Daily)
Refer to the contents to find the page number of the
sections referred to !
Pos.
in fig Action Comment Pos.
in fig Action Comment
Before starting up for the first time on that day Before starting up for the first time on that day
6 Check the engine oil level Refer to the engine manual 6 Check the engine oil level Refer to the engine manual
14 Check the hydraulic reservoir level 14 Check the hydraulic reservoir level
3 Check for free circulation of cooling air 3 Check for free circulation of cooling air
1 Fill the fuel tank 1 Fill the fuel tank
7 Fill the water tank 7 Fill the water tank
8 Check the sprinkler system/Drum 8 Check the sprinkler system/Drum
9 Check the scraper setting/Drum 9 Check the scraper setting/Drum
22 Check the spring loaded scrapers Optional 22 Check the spring loaded scrapers Optional
21 Check the sprinkler system - tires 21 Check the sprinkler system - tires
22 Check the scraper setting - tires 22 Check the scraper setting - tires
19 Test the brakes 19 Test the brakes
After the FIRST 50 hours of operation
See Contents to find the page number of the sections
referred to!
Pos.
in fig Action Comment Pos.
in fig Action Comment
6 Change the engine oil and oil filter Refer to the engine manual 6 Change the engine oil and oil filter Refer to the engine manual
6 Change the fuel filter Refer to the engine manual 6 Change the fuel filter Refer to the engine manual
13 Change the hydraulic fluid filter 13 Change the hydraulic fluid filter
10 Check bolted joints 10 Check bolted joints
64