6
2. Installing the Modem
Hardware Installation
This chapter describes how to install the modem and establishes network connections. You may install the modem on
any level surface (e.g. a table or shelf). However, please take note of the following minimum site requirements before
you begin. Stick the 4 rubber feet at the bottom to avoid scratches.
Pre-installation Requirements
Before you start the actual hardware installation, make sure you can provide the right operating environment including
power requirements, sufficient physical space and proximity to other network devices that are to be connected.
Verify the following installation requirements:
•
Power requirements: 2 x 48VDC / 0.4A
•
The modem should be located in a cool dry place with at least 10cm/4in of space at the front and back for
ventilation.
•
Place the modem out of direct sunlight and away from heat source or area with a high amount of
electromagnetic interference.
•
Check if the network cables and connectors needed for installation are available.
Dynamix VC-MP/SP USER’S MANUAL Ver. A.2
