Dynamix DW IAD - 162, Руководство пользователя

Страница: 93 / 128

IAD Gateway User Manual
Parameter Usages:
-print: Print current IP setting and status
-ip: Assigned IP address for Gateway
-lanip: Specify LAN port IP address (For NAT function), use this
command setup LAN IP address assigned to PC or other machine.
usr/config$ ifaddr -lanip 192.168.XXX.YYY
(The range of LAN IP is XXX: 1-254, YYY: 1-254)
-mask: Assigned internet subnet mask
-gate: Assigned IP default gateway
-nat: Provide DHCP Server and NAT function.
-dhcp: Dynamic Host Configuration (1 = ON; 0 = OFF)
-dns: Setup DNS Server IP Address.
-sntp: Simple Network Time Protocol (0=No update, 1=Specify
server IP, 2=broadcast mode). When SNTP function is
activated, users have to specify a SNTP server as network
time source. An example is demonstrated below while
10.1.1.1 stands for SNTP server’s IP address:
usr/config$ ifaddr -sntp 1 10.1.1.1
-timezone: set local time zone according to GMT
-ipsharing: To enable or disable IAD behind IP sharing function. When
this function is enabled, user must specify a public fixed IP address.
usr/config$ ifaddr -ipsharing 1 210.11.22.33
- 87 -